User_Manual-PILATUS-V1_2.doc 31/57
9.2 Variables
The following variables can be viewed just by typing them; all times are in
seconds.
Variable Description
exptime [time]
Query or set the exposure time
nimages [N]
Query or set the number of images in a sequence
expperiod [time]
Query or set the exposure period for serial exposures.
The exposure period must be at least 3 ms longer than
the exposure time.
imgpath [path]
Query or set the default imgpath
delay [time]
Query or set the external trigger delay. This is the time
to wait after the external trigger before taking the first
image (see section 13)
nexpframe [N]
Query or set the number of exposures per frame. This is
the number of times to enable the detector before
reading out the image (see section 13)
To Next Page
Loading...