3. Operating and Programming
Set the Current Time of Day
1
*
All scheduled cleanings are performed in AUTO Cleaning Mode.
*
The Remote Control uses a 12-hour clock with “AM” and “PM” indicators.
3.4 Programming the Robot
DEEBOT has a Time Scheduling function. DEEBOT can be programmed to automatically clean
once per day, at a specific time, even if nobody is at home. The current time of day and the
cleaning times are scheduled using the Remote Control.
Press
button on the Remote Control to
conrm and save the current time of day.
Press the up and down Direction Control
Buttons
to adjust “hour” and “minute” number.
Press the left and right Direction Control Buttons
to switch between “hour” and “minute.”
Press button on the Remote Control and the
“hour" (first two digits) flashes on the Remote
Control LCD Screen.
To Next Page
Loading...
