If DEEBOT detects a problem and needs your assistance, it emits alarm beeps and the AUTO
Mode Button ashes RED.
3. Operating and Programming
3.7 Alarm Indicator and Sounds
Alarm Sound Problems Solution
One Beep Driving Wheel Malfunction
Check Driving Wheels for tangled hair or
debris and clean as described in section 4
Maintenance.
Three Beeps
Driving Wheel Malfunction
Turn over the robot. Press Driving Wheels to
check for a clicking sound. If they do not click,
please contact Customer Service.
DEEBOT gets into trouble while
working and stops
Manually remove the obstacles and restart
DEEBOT.
Four Beeps Dust Bin Malfunction
Remove the Dust Bin and re-install it properly.
If the robot still emits the alarm, please contact
Customer Service.
Five Beeps Low Battery
Manually place the robot on the Charging Dock
to charge.
Six Beeps Side Brush Malfunction
Check Side Brushes for tangled hair or
debris and clean as described in section 4
Maintenance.
Seven Beeps Anti-Drop Sensor Malfunction
Check Anti-Drop Sensors for dust and clean as
described in section 4 Maintenance.
To Next Page
Loading...
