10
COSMIQ
+
Dive Computer
Back to Contents
Enable the Blue-tooth setting on your mobile device. Make sure the two devices
are close to each other. Access the Deepblu app on your mobile device. In the main
menu of the Deepblu app, press Your Dive Computers. Wait for the connection to
be established. If multiple dive computers are set up with Deepblu, select your device
from the options.
Step 3: Sync dive data
Next, in the COSMIQ
+
menu, press Sync Logs. Dive data will be uploaded
automatically; this may take a few minutes. Do not turn off either device or move
them too far apart. Deepblu also recommends not to switch to other applications
while transferring dive data.
After the syncing process is complete, your logs will be accessible in the Dive Logs
section of the Deepblu app. You can edit them and add photography at any time to
create digital dive logs.
NOTE: Your COSMIQ
+
will only upload each log once. After a log has been transferred
to the Deepblu app once, it will not be duplicated.
To Next Page
Loading...
