DEEPBLU cosmiq+ - 5 Diving with Your COSMIQ; Planning a Dive; Diving in Scuba Mode; Checking and Adjusting the Settings

11
COSMIQ
+
Dive Computer
Back to Contents
5. Diving with your COSMIQ
+
5.1 Planning a dive
The Dive Plan function helps you plan your next dive within safe limits, based on
previous dives executed with your COSMIQ
+
. To access it, navigate to Watch Mode
and press the ADJUST button. The letters PLAN appear as well as values for depth
and your corresponding no-decompression limit (NDL).
Press ADJUST repeatedly to cycle the depth between 9 m (30 ft) and 40 m (135 ft).
Your corresponding NDL (in minutes) will be displayed on the bottom-right. Three
dashes (- - -) mean that the NDL exceeds 300 minutes. The Dive Plan function will not
display depths beyond your NDL or beyond the maximum operating depth (MOD).
WhenyouarenishedusingtheDivePlanfunction,presstheMODE button at any
time to switch back to Watch Mode.
5.2 Diving in Scuba Mode
In Scuba Mode, your COSMIQ
+
will perform decompression calculations and assist
you through any mandatory decompression stops should you accidentally exceed
your no-decompression limit.
5.2.1 Checking and adjusting the settings
Before immersion, your COSMIQ
+
will display a summary of the settings that govern
the decompression calculations. It is important that you check these carefully before
entering the water as no settings can be changed during a dive. Except for the
oxygen level in your air mix, all settings must be set using the Deepblu app.
OVERVIEW
SAFETY
OPERATION
PAIRING
DIVING
DIVE LOGS
CARE
SPECS
WARRANTY
GLOSSARY
DIVING