DEEPBLU cosmiq+ - 4.3 BUTTONS AND NAVIGATION

9
COSMIQ
+
Dive Computer
Back to Contents
The time and date on your COSMIQ
+
are automatically synchronized with your
mobile device when you pair the device. All other settings can be controlled from
the Deepblu app. To change settings, choose COSMIQ Settings from the COSMIQ
+
screen after establishing the connection.
You will see three groups of settings. General covers settings that control the
behavior of your COSMIQ
+
in general or across all dive modes. Scuba Mode and
Freedive Mode control the settings for these respective dive modes.
As you change each setting, they are immediately applied to your COSMIQ
+
. There is
no need to ‘save’ the settings.
4.3 Updatingthermware
DeepbluregularlyreleasesimprovementsandxesforyourCOSMIQ+intheformof
rmwareupdates.Itisimportantthatyouupdatethermwarewheneveranupdate
isavailable.ThermwareversioncurrentlyinstalledonyourCOSMIQ+isindicatedin
the bottom-left corner of the display when your COSMIQ
+
is in Sync Mode.
To update the COSMIQ
+
rmware,makesureyouhavepairedyourCOSMIQ
+
with
your mobile device as per the instructions above. Then put your COSMIQ
+
in sync
mode and select your COSMIQ
+
from the Your Dive Computers section in the
Deepblu app menu.
Press the Firmware Updatebuttontocheckfornewupdates.Ifnewrmwareis
available for your COSMIQ
+
, the application will offer to install it right away. Tap Yes
to install now, or choose No to postpone the update until a more convenient time.
The update process takes 7–12 minutes depending on your handset. Both your
COSMIQ
+
and your phone need to remain on and near each other. Deepblu
recommends keeping both devices charged while updating.
4.4 Synchronizing dive data
Synchronize your dive data from your COSMIQ
+
with the Deepblu app to create digital
dive logs that will be safely stored into the Deepblu cloud. These interactive dive logs
can hold your underwater photography and memories and can be shared with your
buddies.
Step 1: Prepare your COSMIQ
+
Navigate to Sync Mode on your COSMIQ
+
using the MODE button. A countdown time
of one and a half minutes will begin automatically.
Step 2: Prepare the Deepblu app
OVERVIEW
SAFETY
OPERATION
PAIRING
DIVING
DIVE LOGS
CARE
SPECS
WARRANTY
GLOSSARY
PAIRING