DEEPBLU cosmiq+ - 5.2.12 No-Dive Time;Dynamic Lockout

21
COSMIQ
+
Dive Computer
Back to Contents
5.4.4 After your dive
When surfacing or upon reaching 0 m (0 ft) in Freedive, your COSMIQ will
immediately consider the dive over. For other dives this occurs at 1.2m (4 ft). There is
no grace period. Any new immersions will be counted as new dives.
The dive data recorded during each dive is accessible through Log Mode.
Surface Interval
Your COSMIQ
+
will display the time elapsed since the last dive in the middle of the
screen, as well as the dive time and maximum depth of the last dive at the bottom of
the screen.
In addition, your COSMIQ
+
will suggest a minimum safe Surface Interval Time, based
ontheproleofyourlastdive,underneaththeSurfaceIntervalindicator(S.I.).
The Surface Interval Time is calculated according to the following formula (with a
minimum of 3 minutes):
Surface Interval Time = Max. Pressure (bar) x Dive Time (min)
An alarm will sound halfway through the surface interval, as well as at the end of the
surface interval.
OVERVIEW
SAFETY
OPERATION
PAIRING
DIVING
DIVE LOGS
CARE
SPECS
WARRANTY
GLOSSARY
DIVING