Defy DHD406A User Manual

Page 19 of 24
» When the time is over, an audible alarm
will sound. Touch any key on the touch
control panel to silence the audible alarm.
Cooking zone Ɵmer:
The cooking zone timers can only be set
for the cooking zones that are activated.
1. First turn on the hob and then enable the
desired cooking zone. (cooking zone must be
set to a value between 1 and 9)
2. As in the alarm timer, enable the
cooking zone timer by touching " "
key. "00" and " " will appear on the
timer display and a dot will appear on
the lower right side. Thus, cooking
zone timer is activated.
3. You must touch " " key for a second Ɵme in
order to enable cooking zone Ɵmer. Now you
can assign the Ɵmer.
4. Set the desired Ɵme value by touching " "
and " " keys.
To set the hob timers:
1. AŌer enabling the Þrst cooking zone Ɵmer,
touch the " " key again. The control will
turn clockwise towards the next acƟve
cooking zone assigned to the Ɵmer.
Assignment proposal will be shown with a
ßashing " " LED.
2. Set the desired Ɵme value by touching " "
and " " keys.
3. Timer acƟvated for the cooking zone which
was set Þrst is indicated with a conƟnuously
ßashing " " LED.
• More timers can be assigned for other
active cooking zones by touching the "
" key once again.
" " LEDs that illuminate continuously on
the timer display indicate the timer that is
currently counting down.
You can display the values set for cooking
zone timers and egg timer by changing
the position of " " key. A flashing front
right " " LED always shows an
assignment.
If no LED is flashing, value of the egg
timer will be displayed on the timer
screen.
Disabling the Ɵmers:
First you must display the timer by changing
the position of the " " key until the timer
appears. This value can later be cancelled in
2 different ways:
By decreasing the value step by step to "00"
by touching " " key.
By touching " " and " " keys
simultaneously for half second until "00"
appears on timer display.
When the time is over, an audible alarm will
sound. Touch any key on the touch control
panel to silence the audible alarm.
Display the remaining time value of the
cooking zone timer 3 (indicator LED flashes)
to the timer display (the indicator LEDs of
the active timers of the cooking zones 1 and
4 in fact will not be visible on the timer
display).
Keep warm funcƟon (if any)
Keep Warm function of the cooking zone
helps to keep the food warm by selecting an
additional temperature level between 0 and
1. Touch" " key to activate the Keep Warm
function.
Then, " " LED flashes. Touch " " key
again to disable the cooking zone.

Defy DHD406A Specifications

General

Hob type	Ceramic
Product color	Black
Hob width size	- cm
Top surface type	Glass-ceramic
Appliance placement	Built-in
Cooking zone 1 type	Large
Cooking zone 2 type	Medium
Cooking zone 1 power	1800 W
Cooking zone 1 shape	Round
Cooking zone 2 power	1200 W
Cooking zone 1 diameter	180 mm
Cooking zone 1 position	Left front
Cooking zone 2 diameter	140 mm
Cooking zone 2 position	Right rear
Cooking zone 4 position	Right front
Number of cooking zones	4 zone(s)
Cooking zone 1 power source	Electric
Number of gas cooking zones	0 zone(s)
Built-in hood	No
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Connected load (gas)	- W
Connected load (electric)	6000 W
Control type	Touch
Display type	LED
Built-in display	Yes
Control position	Top front

Weight and Dimensions

Depth	510 mm
Width	650 mm
Height	55 mm
Installation compartment width	560 mm
Installation compartment depth (min)	490 mm