EasyManuals Logo

Defy DHD406A User Manual

Defy DHD406A
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Page 5 of 24
Do not leave hot fat or oil
unattended. If overheating
occurs, these could catch fire.
Do not use or store
inflammable products (alcohol,
petrol, benzene etc.) near the
appliance as these pose a fire
risk.
Do not cover the hob or
burners with aluminium foil.
Switch off the power at the
mains in the event of a fault or
when cleaning the appliance.
Only use clean pots with an
even flat base to prevent
cracking on glass due to hot
spots.
If the product is handed over to
someone else for personal use
or second-hand use purposes,
the user manual, product labels
and other relevant documents
and parts should be also given.
Installation and repair
procedures must always be
performed by Authorized
Service Agents. The
manufacturer shall not be held
responsible for damages arising
from procedures carried out by
unauthorised persons which
may also void the warranty.
Before installation, read the
instructions carefully.
Do not operate the product if it
is defective or has any visible
damage.
Ensure that the product function
knobs are switched off after
every use.
Electrical safety
If the product has a failure, it
should not be operated unless it
is repaired by an Authorised
Service Agent. There is the risk of
electric shock!
Only connect the product to a
grounded outlet/line with the
voltage and protection as
specified in the “Technical
specifications”. Have the
grounding installation made by a
qualified electrician while using
the product with or without a
transformer. Our company shall
not be liable for any problems
arising due to the product not
being earthed in accordance
with the local regulations.
Never wash the product by
spreading or pouring water onto
it! There is the risk of electric
shock!
The product must be
disconnected during installation,
maintenance, cleaning and
repairing procedures.
If the power connection cable for
the product is damaged, it must
be replaced by the manufacturer,
its service agent or similarly
qualified persons in order to
avoid a hazard.
Only use the connection cable
specified in the “Technical
specifications”.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Defy DHD406A and is the answer not in the manual?

Defy DHD406A Specifications

General IconGeneral
Hob typeCeramic
Product colorBlack
Hob width size- cm
Top surface typeGlass-ceramic
Appliance placementBuilt-in
Cooking zone 1 typeLarge
Cooking zone 2 typeMedium
Cooking zone 1 power1800 W
Cooking zone 1 shapeRound
Cooking zone 2 power1200 W
Cooking zone 1 diameter180 mm
Cooking zone 1 positionLeft front
Cooking zone 2 diameter140 mm
Cooking zone 2 positionRight rear
Cooking zone 4 positionRight front
Number of cooking zones4 zone(s)
Cooking zone 1 power sourceElectric
Number of gas cooking zones0 zone(s)
Built-in hoodNo
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Connected load (gas)- W
Connected load (electric)6000 W
Control typeTouch
Display typeLED
Built-in displayYes
Control positionTop front
Weight and Dimensions IconWeight and Dimensions
Depth510 mm
Width650 mm
Height55 mm
Installation compartment width560 mm
Installation compartment depth (min)490 mm

Related product manuals