WATER LEVEL
• Select the water level required by pressing the WATER LEVEL button on the control
panel (LOW to HIGH)
• With a little experience you will soon know which levels best suit your requirements.
BEFORE ANY OF THE WASH OPTIONS ARE SELECTED YOU MUST FIRST:
• Insert the power plug into an earthed wall socket and switch on.
• Turn on the cold water tap, and depending on the water temperature required, the hot
water tap also.
• Load the washing into the machine.
• Add detergent and if necessary softener and bleach.
• Close the lid.
• NOTE: IT IS ESSENTIAL TO TURN ON THE COLD WATER TAP FOR ALL
PROGRAMMES. THE MACHINE RINSES IN COLD WATER EVEN WHEN
USING A HOT WASH.
HOT
OPTIONAL
COLD
WASH OPTIONS
The Defy Washmaid features a number of wash options.
The following section will explain the necessary steps to take for:
1. SELECTING A STANDARD WASH PROGRAMME
2. SELECTING AN AUTOMATIC PROGRAMME
3. CUSTOMISING A PROGRAMME
4. PRE-SET WASH TIME
5. SELECTING A FAST WASH PROGRAMME
Please follow the simple instructions and soon you will be able to operate the machine
from memory or use only your favourite programmes
To Next Page
Loading...
Need help?
General