FUZZY LOGIC
This machine has Fuzzy Logic sensors. These enable it to evaluate each load placed in
the drum and to select and modify a wash programme to suit the load. Simply:
1 Load the machine.
2 Press the POWER switch
3 Press the START / HOLD button
The machine will start and complete a suitable programme.
At the end of the wash cycle a buzzer will sound 6 times
DO NOT USE FUZZY LOGIC PROGRAMMES FOR WOOLLEN OR
DELICATE GARMENTS.
STANDARD WASH PROGRAMME
START
HOLD
PRESET
WATER
TEMP
AU TO
SPIN
TIME
RIN SE
WASH
TIME
WATER
LEVEL
POWER
1
2
3
The standard wash is the simplest and most convenient manual programme
1 Press the POWER switch
The water level is automatically set at HIGH or it can be manually selected as
required.
2 Select the water temperature
Press the water temperature button to select a COLD, WARM or HOT wash.
Both indicator lights will glow when WARM is selected.
3 Press the START / HOLD button
The machine will start and complete the selected programme..
At the end of the wash cycle a buzzer will sound 6 times
NOTE
Opening the lid will terminate the spin cycle and an alarm will sound.
The machine will not operate if the water does not reach the selected level.
If the START / HOLD button is not pressed after the POWER button has been pressed,
the machine will automatically switch off after about ten minutes
The water level can be changed at any time during the cycle.
FUZZY
To Next Page
Loading...
Need help?
General