Page 16 from 69
4. Service description
4.8 Configuration
Web server
The basic settings can be entered via the
internal web server: Location, assignment
and type of external coils/transducers for
current measurement, parameters of the
mains signalling voltage.
More detailed explanations of the device
settings can be found in chapter 10.4.
Modbus TCP
Device access via Ethernet interface enables
access to parameters, limit values, current,
cyclical data / status and event data.
Cloud access
The device can be configured via the
DEHNmonitor PQ. You have access to the
current, cyclic and past data/status/event
data including detailed histories.
At present, the DEHNmonitor PQ is still in
test mode.
To Next Page
Loading...