Deif AGC 200 - Active Transmitter; 2-Wire Transmitter

3. RMI oil
4. RMI water
5. RMI fuel
6. Digital
See the following sub-chapters for installation instructions for these input types. For further information re-
garding multi-inputs, see the "Designer's Reference Handbook".
5.2.3 Active transmitter
Multi-input 1
46
49 (common)
4-20 mA
transmitter
Measurement
0V DC
+12/24V DC + +
- -
5.2.4 2-wire transmitter
Multi-input 1
46
49 (common)
0V DC
+12/24V DC
4-20 mA
transmitter
+ -
If the 2-wire transmitter has its own battery supply, the voltage must not exceed 30 V DC.
AGC 200 installation instructions
4189340610 UK
Wirings
DEIF A/S Page 51 of 67