3.2.2 Connection
Connect the CGC 400 port to a USB port on the computer using a standard USB type A to type B (option J7).
Open the utility software on the computer and enter the “Application settings” (F3). Choose the COM port
named as shown below.
Now the connection to the CGC 400 is established, and the controller can be configured.
For further information about the utility software, please refer to the help function in the utility
software (F1).
CGC 400 quick start guide 4189340849 UK The first steps
DEIF A/S Page 7 of 10
To Next Page
Loading...
