4. Display push-buttons and LEDs
4.1 Push-button functions
The push-buttons on the unit have the following functions:
No. Function No. Secondary functionality
1: Scroll the display up once 1: Programming: Increase setpoint value
2: Scroll the display down once 2: Programming: Decrease setpoint value
3: Enter menus/enter value/acknowledges alarm
4: Back button 4: Remove pop-up messages
5: Manual/Block running mode selector 5: Press MAN twice to activate Block mode
6: Lamp test
7: AUTO running mode selector
8: Test running mode selector
9: Close mains breaker
10: Open mains breaker
11: Close generator breaker
12: Open generator breaker
13: Start engine (manual running mode)
14: Stop engine (manual running mode)
15: Reset horn relay 15: Press and hold for 2 seconds to see alarm list
CGC 400 quick start guide 4189340849 UK Display push-buttons and LEDs
DEIF A/S Page 8 of 10
To Next Page
Loading...
