Deif GPU-3 Hydro - First Steps; Basic AC Value Configuration

4. The first steps
4.1 Basic AC values
This chapter guides you through the most essential parameters which have to be adjusted before you can
start using the unit.
The set points can either be adjusted from the display unit or by using the DEIF utility software. The following
examples will show how to adjust the parameters from the display unit.
All settings are reached by placing the cursor under SETUP (in the main page) and pressing ENTER.
Paralleling and Protection Unit
multi-line PPU
PPU V 3.00..0
SETUP MENU
SETUP V3 V2 V1
2010-01-02 12:42:55
Place the cursor under SYST and press ENTER.
Paralleling and Protection Unit
multi-line PPU
G 400 400 400V
SYSTEM SETUP
PROT CTRL I/O SYST
G f-L1 50.00Hz
ML-2 quick start guide 4189340603 UK The first steps
DEIF A/S Page 15 of 23