DelfiScan
Programming Manual
Configure Your DelfiScan
11
PROGRAM
Symbology Reading Control
♦ Readable Bar Code Setting ♦
M_D
EFAULT
Family Code Selection P.C Parameter Selection Option Code
Readable Symbology Setting
SS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
Auto
Code 128 *
UPC-A *
UPC-E *
EAN-13 *
EAN-8 *
Codabar/NW
-7 *
Code 39 *
Trioptic Code 39
Standard/Industrial 2 of 5
Matrix 2 of 5
Interleaved 2 of 5 *
China Postal Code
German Postal Code
Code 93 *
Code 11
MSI/Plessey
UK/Plessey
Telepen
GS1 DataBar (RSS-14) *
IATA
PDF417/Micro PDF417
Codablock F
Korea Post Code
00
01
02
03
04
05
06
07
47
08
38
48
58
68
09
10
11
12
13
14
15
17
18
21
If your application is reading known, limited bar code symbologies, you may increase the reading speed and decrease the reading error possi
bility by
selecting th
ose known symbologies only. Furthermore, to add the “
Symbology ID
” into the transmitted data is also helpful for applications to identify
the specific symbology ID
.
Above symb
ologies marketed with * are enable as default. When you select “Auto”, the imager only read those symbologies marked with
*
When you set the minimum and maximum length of each symbology, please note the data length of scanned bar code doesn’t include star/sto
p
char
acters
.
Remember to scan “FIN” to terminate
this selection. But if you select the “ Auto
”, DelfiScan will terminate this selection
automatically.
To Next Page
Loading...