Delfi DelfiScan C51 - SS Disable Check Digit Verification; SS Enable Check Digit Automatic Verification

DelfiScan
Programming Manual
Configure Your DelfiScan
19
PROGR
AM
Symbology Reading Control
Code 25 Family Setting
M_DEF
AULT
Family Code Selection P.C Parameter Selection Option Code
Code 25 Setting
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
Disable Standard/Industrial 2 of 5
Enable Standard/Industrial 2 of 5
Disable Matrix 2 of 5
Enable Matrix 2 of 5
Disable China Postal Code
Enable China Postal Code
Disable check digit verification
Enable check digit verification
Disable check digit transmission
Enable check digit transmission
0
1
2
3
4
5
6
7
8
9
Code 25 Family Min. Length
SS
MS
Default (04)
01-Maximum
Scan 2 digits from the option code chart in Appendix, then DelfiScan will
terminate this selection automatically.
FIN
(2 digits)
Code 25 Family Max. Length
SS
MS
Default (98)
98-Minimum
Scan 2 digits from the option code chart in Appendix, then DelfiScan will
terminate this selection automatically.
FIN
(2 digits)

We recommend that you select
only one
kind of Code 25 for reading, or set limited
maximum and minimum reading length
for reading, beca
use
the e
ncoding algorithm of Code 25 isn’t very good. To decode all Code 25 automatically or to read variable length Code 25 will increase the error
reading rate.