Delfi DelfiScan C51 - SS Disable Check Digit Transmission; SS Enable Check Digit Transmission

DelfiScan
Programming Manual
Configure Your DelfiScan
24
PROGR
AM
Symbology Reading Control
Telepen Setting
M_DEF
AULT
Family Code Selection P.C Parameter Selection Option Code
Telepen Setting
SS
SS
SS
SS
SS
SS
Disable Telepen
Enable Telepen
Select Telepen Numeric mode
Select Telepen Full ASCII mode
Disable check digit transmission
Enable check digit transmission
0
1
2
3
4
5
Telepen Min. Length
SS
MS
Default (04)
01-Maximum
Scan 2 digits from the option code chart in Appendix, then DelfiScan will
terminate this selection automatically.
FIN
(2 digits)
Telepen Max. Length
SS
MS
Default (98)
98-Minimum
Scan 2 digits from the option code chart in Appendix, then DelfiScan will
terminate this selection automatically.
FIN
(2 digits)