DelfiScan
Programming Manual
Configure Your DelfiScan
29
PROGR
AM
Keyboard Interface Control
Delay Setting
M_DEF
AULT
Family Code Selection P.C Parameter Selection Option Code
Intermessage Delay
SS
MS
None
1-99 (x5) msec.
Scan 2 digits from the option code chart in Appendix, then DelfiScan will
terminate this selection automatically.
FIN
(2 digits)
Intercharacter Delay
SS
MS
None
1-99 (x5) msec.
Scan 2 digits from the option code chart in Appendix, then DelfiScan will
terminate this selection automatically.
FIN
(2 digits)
Interfunction Delay
SS
MS
None
1-99 (x5) msec.
Scan 2 digits from the option code chart in Appendix, then DelfiScan will
terminate this selection automatically.
FIN
(2 digits)
Intermessage Delay
is a time delay between messages output by DelfiScan. Increasing this delay will help host applications process the incoming
data on time.
I
ntercharacter Delay
is a time delay between data characters output by DelfiScan. These two parameters are used to synchroni
ze data
communication when
: 1) the data transmission speed is too fast, characters may be skipped; 2) multitasking operation system or host computers in a
network may slow down the keyboard handling; 3) various notebook or desktop PC systems require different timing parameter settings. Please
always add one extra unit as safety margin when adjusting these two parameters
.
Inter
function Delay
is a time delay between the transmission of each segment of the message string.
To Next Page
Loading...