About this task
The following images indicate the location of the audio board and provide a visual representation of the removal procedure.
Steps
1. Peel the tape securing the tweeter able to the audio board FFC and disconnect it from the audio board.
2. Disconnect the audio board FFC from the system board.
3. Remove the two (M2x2.5) screws securing the audio board to the computer.
4. Lift and remove the audio board from the computer.
Installing the audio board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the audio board and provides a visual representation of the installation procedure.
Removing and installing components
57
To Next Page
Loading...
