Steps
1. Align and replace the audio board into its slot in the computer.
2. Replace the two (M2x2.5) screws to secure the audio board to the computer.
3. Connect the audio board FFC to the system board.
4. Adhere the tweeter cable to the audio board FFC and connect it to the audio board.
Next steps
1. Remove the heatsink assembly.
2. Install the battery.
3. Install the base cover.
4. Follow the procedure in after working inside your computer.
System board
Removing the system board
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Enter the service mode.
3. Remove the microSD card.
58
Removing and installing components
To Next Page
Loading...
