Dell 2335dn Multifunctional Laser Printer User Manual

7.
An IP address consists of 4 bytes.
Enter the numbers from the keypad and use Scroll ( or ) to move between octets and then
press Select ( ).
8.
Enter other parameters, such as the Subnet Mask or Gateway , and then press Select (
).
9.
After entering all parameters, press Cancel ( ) to return to the Standby mode.10.
Dynamic Addressing (BOOTP/DHCP)
To assign the TCP/IP address automatically using a DHCP or BOOTP server on your network.
Press Scroll ( or ) to highlight Setup and then press Select ( ).1.
Press Scroll ( or ) to highlight Network Setup and then press Select ( ).2.
Press Scroll ( or ) to highlight TCP/IP (IPv4) and then press Select ( ).3.
Press Scroll ( or ) to highlight Set IP Address and then press Select ( ).4.
Press Scroll ( or ) to highlight DHCP and then press Select ( ).5.
To assign the address from the BOOTP server, press Select ( ) when BOOTP displays.
Restoring the Network Configuration
You can return the network configuration to its default settings.
Press Scroll ( or ) to highlight Setup and then press Select ( ).1.
Press Scroll ( or ) to highlight Network Setup and then press Select ( ).2.
Press Scroll ( or ) to highlight Clear Settings and then press Select ( ).3.
Press Scroll ( or ) to highlight Yes and then press Select ( ) to restore the
network configuration.
4.
Power the printer off and back on or reset the network interface card.5.

Dell 2335dn Multifunctional Laser Printer Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed	Up to 35 ppm
Print Resolution	Up to 1200 x 1200 dpi
Duplex Printing	Yes
Monthly Duty Cycle	Up to 50, 000 pages
Standard Input Capacity	250 sheets
Standard Output Capacity	150 sheets
Scanner Type	Flatbed, ADF
Scan Resolution	Up to 600 x 600 dpi
Connectivity	USB 2.0, Ethernet 10/100 Base-TX
Display	2-line LCD
Standard Memory	128 MB
Supported Paper Sizes	A4, A5, B5, Executive, Legal, Letter
Fax Transmission Speed	33.6 Kbps
Operating System Compatibility	Windows, Mac, Linux
Max Paper Capacity	850 sheets with optional trays