Dell 2350D - Page 50

Press the Arrow buttons until the correct source appears, and then press the Select button .
Size appears under the source name.
5.
Press the Select button .6.
Press the Arrow buttons until the correct size appears, and then press the Select button .
Submitting Changes appears, followed by Size.
7.
Press the Arrow buttons until Type appears, and then press the Select button .8.
Press the Arrow buttons until the correct type appears, and then press the Select button .
Submitting Changes appears, followed by Type.
9.
Dell 2330dn/2350dn Laser Printer - Attached to a Network
Setting the paper size and type for the printer is done through the Dell Printer Configuration Web Tool.
NOTE: Configuring paper trays through the Dell Printer Configuration Web Tool is available only on the
Dell 2330dn/2350dn Laser Printer.
Type your network printer's IP address in your Web browser.
NOTE: If you do not know your printer's IP address, print a network setup page, which lists the
IP address. For more information see Printing a Network Setup Page.
1.
When the Printer Status page opens, select Printer Settings in the left column.2.
From the Printer Settings page, select Paper Menu.3.
Select Paper Size.4.
Select the paper size you have in each tray.5.
Click Submit.6.
Select Printer Settings in the left column.7.
8.