Dell 2407WFP - Page 22

Icon Menu and
Submenus
Description
EXIT
Select to exit the main menu.
BRIGHTNESS
& CONTRAST
Back
Brightness
Contrast
Exit Menu
This menu is to activate Brightness/Contrast adjustment.
Push to go back to the main menu.
Brightness adjusts the luminance of the backlight.
Push the button to increase brightness and push the button to decrease brightness (min 0 ~ max 100).
Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.
Push the button to increase contrast and push the button to decrease contrast (min 0 ~ max 100).
The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.
Push to exit the OSD main menu.
NOTE: When using DVI source, the contrast adjustment is not available.
AUTO ADJUST
Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with
your particular setup.
NOTE: In most cases, Auto Adjust produces the best image for your configuration.
NOTE: AUTO ADJUST option is only available when you are using the analog (VGA) connector.
INPUT
SOURCE
Back
The INPUT SOURCE menu is to select between different video signals that may be connected to your monitor.
Push to go back to the main menu.
Pa
g
e 5 of 14Documentation
12/10/2007htt
p
://su
pp
ort.dell.com/su
pp
ort/edocs/monitors/2407WFP/en/setu
p
.htm