Dell 5000 Series - 14 Removing the Base Frame; Prerequisites; Procedure

14
Removing the base frame
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in Before working inside your computer. After working inside
your computer, follow the instructions in
After working inside your computer. For more safety
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1. Remove the top cover.
2. Remove the wireless card.
3. Remove the mobile broadband card.
Procedure
1. Turn the system upside down.
2. Remove the screws that secures the bottom cover to the base frame.
1. screws (4) 2. base frame
3. Turn the system the over.
4. Remove the screw from the system grounding port.
24