17
Replacing the DIP switch board
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in Before working inside your computer. After working inside
your computer, follow the instructions in
After working inside your computer. For more safety
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1. Place the DIP switch board on the metal frame.
2. Replace the screws that secure the DIP switch board to the metal frame.
3. Place the DIP switch board on the status-light board.
4. Replace the screws that secure the DIP switch board to the status-light board.
Post-requisites
1. Replace the base frame.
2. Replace the mobile broadband card.
3. Replace the wireless card.
4. Replace the solid-state drive.
5. Replace the top cover.
30
To Next Page
Loading...
