Dell 5000 Series - 19 Replacing the Status-Light Board; Procedure; Post-Requisites

19
Replacing the status-light board
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in Before working inside your computer. After working inside
your computer, follow the instructions in
After working inside your computer. For more safety
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1. Place the status-light board. on the base frame
2. Replace the screws that secure the status-light board to the base frame.
Post-requisites
1. Replace the DIP switch board.
2. Replace the base frame.
3. Replace the mobile broadband card.
4. Replace the wireless card.
5. Replace the solid-state drive.
6. Replace the top cover.
33