24
CHAPTER 3: USING YOUR DESKTOP
Alienware Command Center
e Alienware Command Center gives you access to Alienware’s exclusive
software and is a continuously upgradable control panel. As Alienware releases
new programs, they download directly into the Command Center allowing you to
build a library of system management, optimization, and customization tools.
To access the Command Center, click Start → All Programs→ Alienware→
Command Center→ Command Center.
AlienFX
AlienFX allows you to customize the lighting behavior on your computer. You can
assign lighting behaviors to events like receiving new e-mail, computer going
into the sleep mode, and opening a new application.
AlienFusion
AlienFusion provides access to your Alienware computer’s power management
controls to help increase energy efciency.
Thermal Controls
If you have vents present on top of your computer, use thermal controls to control
the thermal and venting capabilities of your computer by changing the fan speed
and behavior of the vents.
Working With RAID
A Redundant Array of Independent Disks (RAID) is a disk storage conguration
that increases performance or data redundancy. ere are two basic RAID levels
discussed in this section.
RAID level 0 is recommended for higher performance (faster throughput). •
RAID level 1 is recommended for users who need a high level of data •
integrity.
NOTE: RAID requires multiple hard drives. e number of hard drives
required varies depending on the RAID conguration.
NOTE: For maximum performance of hard drive(s), connect the SATA 3.0
(6Gb/s) compatible hard drive(s) to the SATA 3.0 (6Gb/s) port(s) on the
system board.
To Next Page
Loading...
Need help?
General