42
CHAPTER 5: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS
Before You Begin
is section provides procedures for removing and installing the components in
your laptop. Unless otherwise noted, each procedure assumes that the following
conditions exist:
You have performed the steps in “Turning O Your Computer” and “Before •
Working Inside Your Computer” in this section.
You have read the safety information that shipped with your computer.•
A component can be replaced or—if purchased separately—installed by •
performing the removal procedure in reverse order.
Turning O Your Computer
CAUTION: To avoid losing data, save and close all open les and exit all
open programs before you turn o your laptop.
Save and close all open les and exit all open programs. 1.
Click 2. Start → Shut Down.
e laptop turns o after the operating system shutdown process nishes.
Ensure that the computer and any attached devices are turned o. If your 3.
computer and attached devices did not automatically turn o when you
shut down your operating system, press and hold the power button for at
least 8 to 10 seconds until the computer turns o.
To Next Page
Loading...
