Next steps
1. Install the power button.
2. Install the I/O board.
3. Follow the procedure from step 5 to step 20 in Replacing the system board.
NOTE: The system board can be removed and installed along with the heat sink. This simplifies the removal and installation
procedure and avoids breaking the thermal bond between the system board and heat sink.
4. Install the keyboard-controller board.
5. Install the
touchpad.
6. Install the display assembly.
7. Install the headset port.
8. Install the power-adapter port.
9. Install the
rear I/O-cover.
10.Install the graphics-card fan.
11. Install the processor fan.
12. Install the solid state drive bracket.
13. Install the M.2 2230 solid state drive or M.2 2280 solid state drive, as applicable.
14. Install the
wireless card.
15.Install the battery.
16.Install the base cover.
17. Follow the procedure in After working inside your computer.
108
To Next Page
Loading...
