Table 31. System setup options—Overview menu(continued)
Overview
Memory Information
Memory Installed Displays the total computer memory installed.
Memory Available Displays the total computer memory available.
Memory Speed Displays the memory speed.
Memory Channel Mode Displays single or dual channel mode.
Memory Technology Displays the technology that is used for the memory.
Devices Information
Panel Type Displays the Panel Type of the computer.
Panel Resolution Displays the Panel Resolution of the computer.
Video Controller Displays the video controller type of the computer.
Video Memory Displays the video memory information of the computer.
Wi-Fi Device Displays the wireless device information of the computer.
Native Resolution Displays the native resolution of the computer.
Video BIOS Version Displays the video BIOS version of the computer.
Audio Controller Displays the audio controller information of the computer.
Bluetooth Device Displays the Bluetooth device information of the computer.
dGPU Graphics Controller Displays the dGPU Graphics Controller information of the computer.
Table 32. System setup options—Boot Configuration menu
Boot Configuration
Boot Sequence
Boot Mode: UEFI only Displays the boot mode of the computer.
Boot Sequence Displays the boot sequence.
Secure Digital (SD) Card Boot Enables or disables read-only boot from Secure Digital (SD) card.
By default, the Secure Digital (SD) Card Boot option is enabled.
Secure Boot Secure Boot is a method of guaranteeing the integrity of the boot path by
performing additional validation of the operating system and PCI add-in cards.
The computer stops booting to the operating system when a component is not
authenticated during the boot process. Secure Boot can be enabled in BIOS setup
or using management interfaces like Dell Command|Configure, but can only be
disabled from BIOS setup.
Enable Secure Boot Enables the computer to boot using only validated boot software.
By default, the Enable Secure Boot option is enabled.
For additional security, Dell Technologies recommends keeping the Secure Boot
option enabled to ensure that the UEFI firmware validates the operating system
during the boot process.
NOTE: For Secure Boot to be enabled, the computer is required to be in UEFI
boot mode and the Enable Legacy Option ROMs option is required to be turned
off.
Secure Boot Mode Enables or disables the Secure Boot operation mode.
By default, the Deployed Mode is selected.
111
To Next Page
Loading...
