Dell B2360DN Mono Laser User Manual

Print quality problems
Characters have jagged or uneven edges
Action Yes No
Step 1
a Print a font sample list to check if the fonts you are using are supported
by the printer.
1 From the printer control panel, navigate to:
> Reports > > Print Fonts >
2 Press the arrow buttons until PCL Fonts or PostScript
Fonts appears, and then press
.
b Use a font that is supported by the printer or install the font that you
want to use. For more information, contact your system support
person.
c Resend the print job.
Do prints still contain characters that have jagged or uneven edges?
Go to step 2. The problem is solved.
Step 2
a Use a font that is supported by the printer or install the font that you
want to use on your computer. For more information, contact your
system support person.
b Resend the print job.
Do prints still contain characters that have jagged or uneven edges?
Contact
technical
support.
The problem is solved.
Printer is printing blank pages
Troubleshooting 132

Dell B2360DN Mono Laser Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Standard Connectivity	USB 2.0, Ethernet
Duplex Printing	Yes
Output Capacity	150 sheets
Print Speed	Up to 40 ppm
Monthly Duty Cycle	80000 pages
Input Capacity	250 sheets
Memory	128 MB
First Page Out	6.5 sec
Operating Systems Supported	Linux