Dell Dimension 3000 User Manual

Setting Up and Using Your Computer 11
4 Turn on the printer and then turn on the computer. If the Add New Hardware Wizard window
appears, click
Cancel .
5 Install the printer driver if necessary. See the documentation that came with your printer.
Setting Up a Home and Office Network
Connecting to a Network Adapter
NOTE: Plug the network cable into the network adapter connector on the computer. Do not plug the network cable
into the modem connector on the computer. Do not plug a network cable into a telephone wall jack.
1 Connect the network cable to the network adapter connector on the back of your computer.
Insert the cable until it clicks into place, and then gently pull it to ensure that it is secure.
2 Connect the other end of the network cable to a network device.
parallel printer cable
parallel connector on computer
connector on printer
screws (2)
clips (2)
notches (2)

Dell Dimension 3000 Specifications

General

RAM	256MB - 2GB DDR SDRAM
Graphics	Integrated Intel Extreme Graphics 2
Operating System	Windows XP Home or Professional
Chipset	Intel 865GV
Maximum Memory	2GB
Network	Integrated 10/100 Ethernet
Power Supply	250W
Processor	Intel Pentium 4
Storage	40GB IDE HDD
Optical Drive	CD-ROM
Audio	Integrated Audio
Ports	USB 2.0, serial, parallel
Expansion Slots	3 x PCI
Weight	Approx. 24 lbs