Removing the top cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Place the system on a clean and flat surface.
2 Loosen the captive screw that secures the top cover to the system base.
1 top cover 2 captive screw
3 system base
12
To Next Page
Loading...
Need help?
General
