Replacing the DIP switch
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Place the DIP switch board on the metal frame.
2 Replace the screws that secure the DIP switch board to the metal frame.
3 Place the DIP switch board on the status-light board.
4 Replace the screws that secure the DIP switch board to the status-light
board.
Post-requisites
1 Replace the base frame.
2 Replace the mobile broadband card.
3 Replace the wireless card.
4 Replace the solid-state drive.
5 Replace the top cover.
36
To Next Page
Loading...
Need help?
General
