Dell EMC PowerEdge T440 - Page 115

PCIe Slot Processor Connection Height Length Link Width Slot Width
4 (Gen3) Processor 1 Full Height Half Length x8 x8
5 (Gen3) Processor 1 Full Height Half Length x8 x8
NOTE: The expansion-card slots are not hot-swappable.
The following table describes the installation order for installing expansion cards to ensure proper cooling and mechanical t. The expansion
cards with the highest priority must be installed rst by using the slot priority indicated.
Table 37. Riser congurations: No riser - 1 CPU
Card Type Slot Priority Maximum Allowed
GPGPU (NVIDIA) 2 1
Card, Network(Broadcom/Intel) 1,2,4,5 4
NIC (Intel) 1,2,4,5 4
PERC9/ 9.14G (FXN) 4,5,2 3
RAID - PERC9+ (Internal) (Dell) 4,5,2 3
RAID - PERC10 (Internal) (Dell) 4,5,2 3
RAID - PERC10 (External)(Dell) 4,5,2 3
NIC(Broadcom) 4,5,2 3
Card, Network ((Broadcom/Intel/Emulex,
Qlogic)
4,5,2 3
BOSS M.2 (SATA) (Dell) 4,5,2 3
Table 38. Riser congurations: No riser - 2 CPU
Card Type Slot Priority Maximum Allowed
GPGPU (NVIDIA, AMD) 3 1
Card, Network (Broadcom, Intel) 1,2,4,5,3 5
NIC(Intel) 1,2,4,5,3 5
GPGPU (NVIDIA) 3,2 2
PERC9/ 9.14G (FXN) 4,5,3,2 4
RAID - PERC9+ (Internal) (Dell) 4,5,3,2 4
RAID - PERC10 (Internal) (Dell) 4,5,3,2 4
RAID - PERC10 (External)(Dell) 4,5,3,2 4
NIC(Broadcom) 4,5,3,2 4
Card, Network ((Broadcom/Intel) 4,5,3,2 4
Card,Controller (Emulex, Qlogic) 4,5,3,2 4
BOSS M.2 (SATA) (Dell) 4,5,3,2 4
Dell EMC PowerEdge T440 Installation and Service Manual
Installing and removing system components
115