Table 2 Left control panel options
Item Indicator or button Icon Description
1 Status LED indicators N/A Indicate the status of the system. For more information, see
Status LED indicators.
2 System health and system
ID indicator
Indicates the system health. For more information, see System
health and system ID indicator codes.
3 iDRAC Quick Sync 2
wireless indicator
(optional)
Indicates if the iDRAC Quick Sync 2 wireless option is activated.
The Quick Sync 2 feature allows management of the system using
mobile devices. This feature aggregates hardware/firmware
inventory and various system level diagnostic/error information
that can be used in troubleshooting the system. You can access
system inventory, Dell EMC Lifecycle Controller logs or system
logs, system health status, and also configure iDRAC, BIOS, and
networking parameters. You can also launch the virtual Keyboard,
Video, and Mouse (KVM) viewer and virtual Kernel based Virtual
Machine (KVM), on a supported mobile device. For more
information about the feature, see the
Integrated Dell Remote
Access Controller User's Guide
at www.dell.com/idracmanuals.
Note: iDRAC Quick Sync 2 wireless indicator is available only
on certain configurations.
Note: For more information about the indicator codes, see System diagnostics and indicator codes.
Right control panel view
The right control panel is explained as follows:
Figure 3
Right control panel
VxFlex appliance and VxFlex Ready Node R740xd system overview
R740xd Owner's Guide 9
To Next Page
Loading...
Need help?
General
