Installation in cabinets with 3-phase wye power distribution
Note: Install all the equipment in the cabinet before installing and connecting the
power and I/O cables.
l
Install the equipment as described in Installation of the equipment in the
cabinet on page 20.
l
If you are installing the minimum configuration, refer to the figure and table
below for minimum configurations for the equipment stack up in the cabinet.
l
If you are installing the maximum configuration, refer to the figure and table
below for maximum configurations for the equipment stack up in the cabinet.
Table 6 Minimum configuration in 3-phase wye power distribution cabinets
Component Function Description Quantity Cabinet U Space
Data Server R640 Server 3 2 - 4
Management Server Management Server 1 20
Management Switch Customer provided 1 GbE
switch
1 21
Data Switch Customer provided 10 GbE
switch
2 23-24
R640 Equipment Installation
Dell EMC VxFlex Ready Node Server Installation Guide 27
To Next Page
Loading...
