Dell FORCE10 Open Automation User Manual

32 | Smart Scripting
www.dell.com | support.dell.com
makephyintnoshutdown stackUnitNum, portId Enables the specified port.
makephyintshutdown stackUnitNum, portId Disables the specified port.
makephyintswitch stackunitNum, portId Configures the specified port as a Layer 2 switchport.
makevlanintnoshutdown vlanId Enables the specified VLAN interface.
makevlanintshutdown vlanId Disables the specified VLAN interface.
ping ipAddress Pings (via ICMP) an IP address from the switch.
showarptbl None Returns the table of learned ARP addresses.
showbgpneighbors None Returns detailed BGP neighbor information.
showbgproute None Returns BGP-learned routes.
showbgpsummary None Returns BGP peer summary and status.
showbootvar None Returns system boot variables.
showcmd command Executes a specified show command.
showenvironment None Returns environment-monitoring variable values.
showipintbrief None Returns full interface list with up/down status.
showipintbrieflag None Returns brief interface status (up/down/ admin up/down) of all
port-channel interfaces.
showipintbriefman None Returns brief interface status (up/down/ admin up/down) of all
management interfaces.
showipintbriefphy None Returns brief interface status (up/down/ admin up/down) of all
physical interfaces.
showipintbriefvlan None Returns brief interface status (up/down/ admin up/down) of all
VLAN interfaces.
showiproute None Returns switch routing table.
showisisneighbors None Returns detailed ISIS neighbor information.
showisisroute None Returns ISIS-learned routes.
showlagintstatus lagId Returns detailed status information for a specified port channel.
showlagintvlanmembers lagId Returns VLAN membership of a specified port channel.
showlog None Returns system log output.
showmacaddrtbl None Returns the table of learned MAC addresses.
showmem lagId Returns switch memory usage.
showospfneighbors None Returns detailed OSPF neighbor information.
showospfroute None Returns OSPF-learned routes.
showphyintband stackunitNum, portId Returns in/out bandwidth average for a specified port.
showphyintstatus stackunitNum, portId Returns detailed status information for a specified port
showphyintvlanmembers stackunitNum, portId Returns VLAN membership of a specified port.
showproccpu None Returns switch CPU usage and running processes.
showrun None Returns the running configuration (in memory).
showver None Returns software version information.
Table 3-5. Supported API Functions in UNIX Shell Scripts (continued)

Dell FORCE10 Open Automation Specifications

General

Series	FORCE10
Model	Open Automation
Jumbo Frame Support	Yes
Product Type	Switch
Ports	Varies by model
Switching Capacity	Varies by model
Forwarding Rate	Varies by model
MAC Address Table Size	Varies by model
Power Supply	Varies by configuration
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Dimensions	Varies by model
Weight	Varies by model