Dell FORCE10 Open Automation User Manual

About this Guide | 7
Related Documents
For more information about the Dell Force10 Networks switches discussed in this
document, refer to the following documents:
•S55
• FTOS Command Line Reference Guide for the S55 System
• FTOS Configuration Guide for the S55 System
• Installing the S55 System
•S60
• FTOS Command Line Reference Guide for the S60 System
• FTOS Configuration Guide for the S60 System
• Installing the S60 System
• S4810
• FTOS Command Line Reference Guide for the S4810 System
• FTOS Configuration Guide for the S4810 System
• Installing the S4810 System
• Z9000
• FTOS Command Line Reference Guide for the Z9000 System
• FTOS Configuration Guide for the Z9000 System
• Installing the Z9000 System
• FTOS Release Notes for the platform and version you are using.

Dell FORCE10 Open Automation Specifications

General

Series	FORCE10
Model	Open Automation
Jumbo Frame Support	Yes
Product Type	Switch
Ports	Varies by model
Switching Capacity	Varies by model
Forwarding Rate	Varies by model
MAC Address Table Size	Varies by model
Power Supply	Varies by configuration
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Dimensions	Varies by model
Weight	Varies by model