Dell FORCE10 Open Automation User Manual

Smart Scripting CLI | 35
4
Smart Scripting CLI
Overview
Smart Scripting CLI is supported on platforms: z
Commands
• package install
• package uninstall
• script
• show packages
• start shell
• username
package install
z
Install the Smart Scripting package. This command downloads the package from the
specified location, and installs it in the internal flash memory on a switch.
Syntax
package install location
Parameters
Defaults
None
Command Modes
EXEC Privilege
Command
History
location Enter the location from where you will download and install an Open Automation
package, where location is one of the following values:
•
From the local flash: flash://filename
•
From an FTP server: ftp://userid:password@host-ipaddress/filepath
•
From a TFTP server: tftp://host-ipaddress/filepath
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.8.0 Introduced on the S4810.

Dell FORCE10 Open Automation Specifications

General

Series	FORCE10
Model	Open Automation
Jumbo Frame Support	Yes
Product Type	Switch
Ports	Varies by model
Switching Capacity	Varies by model
Forwarding Rate	Varies by model
MAC Address Table Size	Varies by model
Power Supply	Varies by configuration
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Dimensions	Varies by model
Weight	Varies by model