Virtual Server Networking | 53
Uninstalling VSN
Uninstalling the VSN package removes it from the internal flash memory on a
switch.
Viewing VSN information
To view the configuration of currently active hypervisor sessions, enter the show
configuration
command in HYPERVISOR mode.
Figure 5-3. Display a Hypervisor Session: show configuration
FTOS(conf-hypervisor)#show config
!
hypervisor LocalNetwork
mode config
access https://10.10.10.10 username admin password 7 1d28e9f33f99cf5c
To display a list of currently supported hypervisors, enter the show hypervisors
supported
command.
Figure 5-4. Display Supported Hypervisors: show hypervisor supported
FTOS#show hypervisor supported
vmware
xen-citrix
Caution: Before you uninstall the VSN package, you must first stop all VSN scripts that are
currently running using the no script script-name command.
Command Syntax Command Mode Task
package uninstall name
Enter the name of the VSN package, exactly as
it appears in show packages output.
EXEC Privilege Uninstall the VSN package from the system.
Command Syntax Command Mode Task
show configuration HYPERVISOR Display configuration of current hypervisor
sessions.
Command Syntax Command Mode Task
show hypervisor supported EXEC Privilege Display a list of supported hypervisors.
To Next Page
Loading...
Need help?
General
