Dell FORCE10 Open Automation User Manual

38 | Smart Scripting CLI
www.dell.com | support.dell.com
Enter the no script script-name command to stop a running script.
To display the scripts that are currently running, including the scripts you have
stopped, enter the show running-config | grep command.
show packages
z
Display the installed Open Automation packages, including version number and
contents.
Syntax
show packages
Defaults
None
Command Modes
EXEC
EXEC Privilege
Command
History
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.8.0 Introduced on the S4810.
Version 8.3.5.1 Introduced on the S55.
Version 8.3.3.4 Introduced on the S60.

Dell FORCE10 Open Automation Specifications

General

Series	FORCE10
Model	Open Automation
Jumbo Frame Support	Yes
Product Type	Switch
Ports	Varies by model
Switching Capacity	Varies by model
Forwarding Rate	Varies by model
MAC Address Table Size	Varies by model
Power Supply	Varies by configuration
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Dimensions	Varies by model
Weight	Varies by model