Dell FORCE10 Open Automation User Manual

Virtual Server Networking CLI | 63
show hypervisor supported
Display the types of hypervisors currently supported by VSN.
Syntax
show hypervisor supported
Defaults
None
Command Modes
EXEC Privilege
Command
History
Usage
Information
Use this information when defining types of hypervisor connections with the
hypervisor command.
Related
Commands
Example FTOS#show hypervisor supported
vmware
xen-citrix
show packages
Display all Open Automation packages installed on a switch.
Syntax
show packages
Defaults
None
Command Modes
EXEC Privilege
Command
History
Version 8.3.8.0 Introduced on the S4810.
Version 8.3.5.1 Introduced on the S55.
Version 8.3.3.4 Introduced on the S60.
hypervisor Define a hypervisor instance.
Version 8.3.8.0 Introduced on the S4810.
Version 8.3.5.1 Introduced on the S55.
Version 8.3.3.4 Introduced on the S60.

Dell FORCE10 Open Automation Specifications

General

Series	FORCE10
Model	Open Automation
Jumbo Frame Support	Yes
Product Type	Switch
Ports	Varies by model
Switching Capacity	Varies by model
Forwarding Rate	Varies by model
MAC Address Table Size	Varies by model
Power Supply	Varies by configuration
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Dimensions	Varies by model
Weight	Varies by model