Next steps
1. Install the fan and heat-sink assembly.
2. Install the USB board.
3. Install the I/O board.
4. Install the system board.
5. Install the power button.
6. Install the power adapter port.
7. Install the front-panel light-board.
8. Install the speakers.
9. Install the wireless card.
10. Install the memory module.
11. Install the solid-state drive.
12. Install the display assembly.
13. Install the touchpad
14. Install the rear cover.
15. Install the battery.
16. Install the base cover.
17. Follow the procedure in After working inside your computer.
54
Removing and installing components
To Next Page
Loading...
