Table 3. System setup options—System information menu (continued)
Overview
Service Tag Displays the Service Tag of the system.
Asset Tag Displays the Asset Tag of the system.
CPU Type Displays the CPU type.
M.2 PCIe SSD Displays the SSD details.
System Memory Displays the memory of the system.
Memory Speed Displays the memory speed of the system.
Signed Firmware Update Displays whether the Signed Firmware Update is enabled on your system.
Battery Information
Percentage Displays that battery charge percentage.
Health Displays the battery health of the system.
Table 4. System setup options—Boot menu
Boot Configuration
UEFI Boot
USB1-EFI USB Device
HDD1 - Windows Boot Manager
HDD2 - EFI Hard Drive
Table 5. System setup options—Security menu
Boot Configuration
Secure Boot
Secure Boot Enable or disable the secure boot feature.
By default, the option is disabled.
Updating the BIOS
Updating the BIOS in Windows
About this task
CAUTION:
If BitLocker is not suspended before updating the BIOS, the next time you reboot the system it
will not recognize the BitLocker key. You will then be prompted to enter the recovery key to progress and the
system will ask for this on each reboot. If the recovery key is not known this can result in data loss or an
unnecessary operating system re-install. For more information on this subject, search in the Knowledge Base
Resource at www.dell.com/support.
Steps
1. Go to www.dell.com/support.
2. Click Product support. In the Search support box, enter the Service Tag of your computer, and then click Search.
NOTE:
If you do not have the Service Tag, use the SupportAssist feature to automatically identify your computer. You
can also use the product ID or manually browse for your computer model.
3. Click Drivers & Downloads. Expand Find drivers.
4. Select the operating system installed on your computer.
5. In the Category drop-down list, select BIOS.
BIOS setup
49
To Next Page
Loading...
