Table 16. System setup optionsāPre-boot Behavior menu (continued)
Pre-boot Behavior
USB-C Warnings Specify the maximum number of characters allowed for Admin password.
Default: 32
Enable Dock Warning Messages Enable or disable dock warning messages.
Default: ON
Fastboot Configures the speed of the UEFI boot process.
Default: Thorough. Performs complete hardware and configuration initialization
during boot.
Extend BIOS POST Time Configures the BIOS POST (Power-On Self-Test) load time.
Default: 0 seconds
Table 17. System setup optionsāVirtualization Support menu
Virtualization
Intel Virtualization Technology
Enable Intel Virtualization Technology
(VT)
Enables the computer to run a virtual machine monitor (VMM).
Default: ON
VT for Direct I/O
Enable Intel VT for Direct I/O Enables the computer to perform Virtualization Technology for Direct I/O (VT-
d). VT-d is an Intel method that provides virtualization for memory map I/O.
Default: ON
DMA Protection
Enable Pre-Boot DMA Support Enables the Pre-boot DMA protection for internal and external ports.
Default: ON
Enable OS Kernel DMA Support Enables the Kernel DMA protection for internal and external ports.
Default: ON
Table 18. System setup optionsāPerformance menu
Performance
Multi-Core Support
Multiple Atom Cores Changes the number of CPU cores available to the operating system. The
default value is set to the maximum number of cores.
Default: All Cores
Intel SpeedStep
Enable Intel SpeedStep Technology Enables or disables the Intel SpeedStep Technology to dynamically adjust
processor voltage and core frequency, decreasing average power consumption
and heat production.
Default: ON
C-States Control
Enable C-State Control Enables or disables the CPU's ability to enter and exit low-power states.
Default: ON
Enable Adaptive C-States for Discrete
Graphics
Allows to dynamically detect high usage of discrete graphics and adjust system
parameters for higher performance during that time period.
System setup 67
To Next Page
Loading...
