Table 31. System setup options—Storage menu
Storage
Storage interface
Port Enablement This page allows you to enable the onboard drives.
By default, the M.2 PCIe SSD option is enabled.
Drive Information
M.2 PCIe SSD
Type Displays the M.2 PCIe SSD type information of the system.
Device Displays the M.2 PCIe SSD device information of the system.
Table 32. System setup options—Display menu
Display
Display Brightness
Brightness on battery power Enable to set screen brightness when the system is running on battery power.
Brightness on AC power Enable to set screen brightness when the system is running on AC power.
Table 33. System setup options—Power menu
Power
Lid Switch
Enabled Lid Switch Enable or disable the lid switch.
By default, the Enable Lid Switch option is enabled.
Power On Lid Open When enabled, allows the system to power up from the off state whenever the
lid is opened.
By default, the Power On Lid Open option is enabled.
Table 34. System setup options—Security menu
Security
Legacy Manageability Interface
Access
Displays the access options for the Legacy Manageability Interface.
By default, the Enabled option is selected.
Table 35. System setup options—Passwords menu
Passwords
Admin Password Set, change, or delete the administrator password.
NVMe SSD0 Set, change, or delete the NVMe SSD0 password.
Table 36. System setup options—Update, Recovery menu
Update, Recovery
SupportAssist OS Recovery Enable or disable the boot flow for SupportAssist OS Recovery tool in the
event of certain system errors.
By default, the option is enabled.
BIOSConnect Enable or disable cloud Service operating system recovery if the main operating
system fails to boot with the number of failures equal to or greater than the
value specified by the Auto operating system Recovery Threshold setup option
and local Service operating system does not boot or is not installed.
By default, the option is enabled.
BIOS setup 91
To Next Page
Loading...
