Dell Inspiron 15 5000 - Replacing the Power-Adapter Port; Procedure; Post-Requisites

Replacing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align the screw hole on the power-adapter port with the screw hole on the palm
rest and keyboard assembly.
2 Replace the screw (M2x2) that secures the power-adapter port to the palm rest
and keyboard assembly.
3 Route the power-adapter port cable through the routing guides on the palm rest
and keyboard assembly.
4 Connect the power-adapter port cable to the system board.
5 Close the right hinge and replace the three screws (M2.5x5) that secure the
right hinge to the system board and palm rest assembly.
Post-requisites
1 Replace the wireless card.
2 Replace the base cover.
3 Replace the optical drive (optional).
73